Sudhausbau 5 HL Brewhouse (2016)

Overview

This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation.

Components

Grist mill

• 1 piece grist mill
• 2 foot stands with rubber bumpers
• 1 additional larger hopper
• Throughput up to 200 Kg/h

Brewhouse in stainless steel

• Cast wort/ brew
• 2 units steam heated

Control system with automatic mashing

• Switch and control cabinet
  • Completely wired and ready for connection
  • Control cabinet assembly with:
  • 1 x control via touch screen Siemens 9"
  • 1 x contactor circuit 0,37 KW agitator
  • 1 x contactor circuit 0,37 KW chipper
  • 1 x contactor circuit 230V/16A steam valve
  • 2 x 24VDC outlet temperature sensor
  • 2 x temperature measurement
  • Analog input 4-20
• Hardware and software
  • The control unit with automatic mashing is designed for the connection of the agitator, chopper and
  • 2 temperature sensors
  • Wort boiling also runs automatically via the control system
  • The pump and the agitator are frequency controlled

Steam generator

• 1 piece electr. steam generator
• Operating pressure: max. 5 BAR
• heating capacity: 45 kW / h
• Voltage: 400 V / 3 / 50hz / PE
• Steam output: approx. 60 kg / h

Water treatment for steam generator

• 1 piece water treatment and softening

Fermentation cellar

• 2 pieces open fermentation vats 10 hl (year of construction 2015)
• Round design, with cooling stand on standard feet
• The vats are equipped with lid and spray ball for cleaning
• Net capacity: 10,0 hl
• Capacity gross: 13,0 hl
• Cooling
  • 1 cooling zones on the jacket each 1.6 m2
• Equipment
  • Temperature sensor for cooling control
  • Tap for sampling
  • Inlet/outlet DN25 with disc valve

Storage cellar

• 3 pcs. storage tank 10 hl (horizontal, without cooling and insulation)
• Content net: 10,0 hl
• Capacity gross: 11,0 hl
• 2 pcs. storage tank 5 hl (lying, without cooling and insulation)
• Content net: 5,0 hl
• Capacity gross: 6,0 hl

Water treatment

• 1 hot water tank
• Volume 700 l, unpressurized
• Insulation 70 mm by mineral wool and covered with stainless steel
• 1 screw-in heater to keep the water at temperature
• 1 cold water tank
• Volume 700 l, unpressurized
• Insulation 70 mm by mineral wool and clad with stainless steel
• The cold water tank is cooled by the offered refrigeration unit

Refrigeration control

• 1 piece cooling unit
• 3 pieces single tank control / temperature controller
• Ready-made control unit for
• Tank and direct connection with the cooling circuit
• With solenoid valve, strainer and thermal sensor ready for immediate use
• Connection 1⁄2"

Centrifugal pump

• 1 mobile single-stage centrifugal pump on mobile frame WITHOUT hood
• 2 pieces of beer hose in DN 25

Semi-automatic KEG cleaning system

• 1 piece semi-automatic KEG-cleaning unit
• Type: BabyKEG
• Capacity: 20 KEG/h
• SPS and control panel
• Co2 valve for preloading
• KEG residual pressure test
• Insulated detergent tank with electric heater